Attic Applications
An excellent insulation for new homes or over existing attic insulation.
Attic Application
Cellulose Insulation is often applied over existing batt insulation in attics to fill the voids. It is also an excellent insulation for attics of new homes.
Blown Cellulose
Igloo Wind Baffles are use to ensure proper ventilation in soffits and the attic, to provide maximum settings all over the attic and hard to reach spaces as well as to prevent shifting of insulation material.
Igloo Wind Baffles are available with private labeling to your company’s name. Igloo can also provide 14 inch long Igloo Attic Rulers to measure settling.
Stabilized Cellulose System
This system uses water as a stabilizing effect to prevent any shifting of the cellulose in the attic, eliminate any settling of the fluffy insulation material as well as reduce dust. For more information on all equipment and accessories, we invite you to contact us.
Wall Applications
Densely packed cellulose insulation blocks air better than fiberglass.
Igloo Cellulose can be injected in the exterior walls of existing homes or buildings by drilling small openings from the inside or the outside. The insulation material is dense packed, then plugs are used to close openings for a smooth finish.
For new constructions Igloo Dry Cellulose Cavity Fill System consists of using a membrane that is fastened to the dry exterior walls which creates a cavity to inject Igloo Cellulose Insulation. Results are unparallel.
Igloo Dry Cellulose Cavity Fill System
This system uses a strong poly membrane that is fastened to the studs with fasteners and wood furring. Openings are then made to inject dry cellulose with hose at mid section. Material must be injected to a minimum density of 3.0 lb/cu ft or dense packed up to 5 lb.
The membrane allows air to filter through during Injection while preventing dust fibers to escape into the room.
Igloo Cellulose Stabilized Wall System
This system uses cellulose fiber with Igloo S10 Liquid Binder which is sprayed between studs in all of the open cavities. The binder allows for quick drying to have rapid installation of vapor barrier. Excess insulation is scrubbed to provide a beautiful even finish. Fallen material is then re-circulated using proper equipment to reduce waste.
Accoustical Applications
Cellulose insulation is an efficient noise barrier or absorber.
Igloo Cellulose has proven itself as one of the most efficient low-cost solution to reduce sound propagation from one area to another. Its application encloses the noise generating source and acts like a sound barrier or absorber keeping noise levels down.
Commercial buildings, multi-apartments buildings, condominiums, sound and music studios as well as houses can benefit greatly from Igloo Cellulose material to attenuate effectively sound or undesired noise.
Here are some examples :
- Reduce obnoxious noise emitting from neighbors or equipment for a quiet living or working space.
- Reduce noise or sound levels in specific areas from surrounding ones for better quality of living.
